DebuggingBouffaloLabChipsWithGDB：修订间差异
跳转到导航
跳转到搜索
无编辑摘要 |
|||
| （未显示同一用户的4个中间版本） | |||
| 第2行： | 第2行： | ||
==== | = How to debug the DVK light development board via CKLink: = | ||
==== 1. Connect to the PC via USB. ==== | |||
GPIO 1 TCK | |||
GPIO 3 TDI | |||
GPIO 2 TDO | |||
GPIO 0 TMS | |||
[[文件:BL616DVK Light CKLinkLite.jpg| 600像素 | BL616DVKLight_CKLinkLite]] | [[文件:BL616DVK Light CKLinkLite.jpg| 600像素 | BL616DVKLight_CKLinkLite]] | ||
==== 2. Perform GDB debugging. ==== | |||
<code>DebugServerConsole</code> | Using Ubuntu as an example, run the following two commands separately:<code>DebugServerConsole</code> | ||
<code>riscv64-unknown-elf-gdb *.elf</code> | <code>riscv64-unknown-elf-gdb *.elf</code> | ||
[[文件:BL616DVKLight_CKLinkLite.gif| BL616DVKLight_CKLinkLite]] | [[文件:BL616DVKLight_CKLinkLite.gif| BL616DVKLight_CKLinkLite]] | ||
2026年6月24日 (三) 01:09的最新版本
How to debug the DVK light development board via CKLink:
1. Connect to the PC via USB.
GPIO 1 TCK
GPIO 3 TDI
GPIO 2 TDO
GPIO 0 TMS
2. Perform GDB debugging.
Using Ubuntu as an example, run the following two commands separately:DebugServerConsole
riscv64-unknown-elf-gdb *.elf
