FlashWholeBin：修订间差异
跳转到导航
跳转到搜索
无编辑摘要 |
无编辑摘要 |
||
| 第1行： | 第1行： | ||
1. After pressing boot, press and release chip_en, and the device will enter programming mode. | 1. After pressing boot, press and release chip_en, and the device will enter programming mode. | ||
2. Open BLFlashCube-ubuntu (BLFlashCube.exe), then go to Flash Utils -> Port/SN(/dev/ttyUSB0) -> Flash Program (Browse) -> select lg_demo_20260528.bin -> Download. | 2. Open BLFlashCube-ubuntu (BLFlashCube.exe), then go to Flash Utils -> Port/SN(/dev/ttyUSB0) -> Flash Program (Browse) -> select lg_demo_20260528.bin -> Download. | ||
[[index.php?title=文件:Flash_wholebin.gif|链接=文件:Flash_wholebin.gif| Flash_wholebin]] | [[index.php?title=文件:Flash_wholebin.gif|链接=文件:Flash_wholebin.gif| Flash_wholebin]] | ||
3. Open the serial port (baud rate 2M), then press rst to view the log. | 3. Open the serial port (baud rate 2M), then press rst to view the log. | ||
2026年5月28日 (四) 08:24的版本
1. After pressing boot, press and release chip_en, and the device will enter programming mode.
2. Open BLFlashCube-ubuntu (BLFlashCube.exe), then go to Flash Utils -> Port/SN(/dev/ttyUSB0) -> Flash Program (Browse) -> select lg_demo_20260528.bin -> Download.
链接=文件:Flash_wholebin.gif| Flash_wholebin
3. Open the serial port (baud rate 2M), then press rst to view the log.