FlashWholeBin：修订间差异
跳转到导航
跳转到搜索
创建页面，内容为“ 1. After pressing boot, press and release chip_en, and the device will enter programming mode. 2. Open BLFlashCube-ubuntu (BLFlashCube.exe), then go to Flash Utils -> Port/SN(/dev/ttyUSB0) -> Flash Program (Browse) -> select lg_demo_20260528.bin -> Download. 3. Open the serial port (baud rate 2M), then press rst to view the log.” |
无编辑摘要 |
||
| （未显示同一用户的3个中间版本） | |||
| 第1行： | 第1行： | ||
1. After pressing '''boot''', press and release '''chip_en''', and the device will enter '''programming mode'''. | |||
2. Open '''BLFlashCube-ubuntu''' ('''BLFlashCube.exe'''), then go to Flash Utils -> Port/SN(/dev/ttyUSB0) -> Flash Program (Browse) -> select lg_demo_20260528.bin -> '''Download'''. | |||
[[文件:Flash_wholebin.gif | Flash_wholebin Overview]] | |||
3. Open the serial port (baud rate 2M), then press | |||
3. Open the serial port (baud rate '''2M'''), then press '''chip_en'''(reset) to view the log. | |||
2026年5月28日 (四) 08:28的最新版本
1. After pressing boot, press and release chip_en, and the device will enter programming mode.
2. Open BLFlashCube-ubuntu (BLFlashCube.exe), then go to Flash Utils -> Port/SN(/dev/ttyUSB0) -> Flash Program (Browse) -> select lg_demo_20260528.bin -> Download.
3. Open the serial port (baud rate 2M), then press chip_en(reset) to view the log.